BSZYW - LF INSIGNIA WHITE 4382

  • MSDS: BSZYW
  • Manufacturer: STERLING LACQUER MFG CO
  • Product Name: LF INSIGNIA WHITE 4382
  • National Stock Number: 8010-00F032666
Product Identification

Product ID:LF INSIGNIA WHITE 4382
MSDS Date:01/13/1994
FSC:8010
NIIN:00F032666
MSDS Number: BSZYW

Responsible Party
STERLING LACQUER MFG CO
3150 BRANNON AVE
ST. LOUIS, MO 63139-1422
US

Emergency Phone: 314-776-4450

Info Phone: 314-776-4450

Cage: 60003

Contractor
STERLING LACQUER MFG CO
ST. LOUIS, MO 63139-1422 US

Telephone: 314-776-4450

Cage: 60003

Ingredients

ETHYL ACETATE 99% GRADE

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 5%

OSHA PEL 1400 MG/CUM

ACGIH TLV: 1400 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 7%

OSHA PEL 200 PPM

ACGIH TLV: 590 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,

CAS: 108-65-6

RTECS: AI8925000

Fraction By Weight: 15%


XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 2%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 30%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)


TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 30-40%

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION TO RESPIRATORY
TRACT OR NARCOSIS. EYES: IRRITATION, MAY INJURE EYE TISSUE IF NOT
PPROPERLY REMOVED. SKIN: SLIGHT IRRITATION DUE TO SOLVENTS.
INGESTION: DO NOT TAKE INTERNALLY. C ONSULT PHYSICIAN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: NAUSEA, VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS.

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH AFFECTED AREA W/SOAP & WATER. INHALATION: MOVE TO
FRESH AIR. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:21F
Lower Limits:1.1%
Upper Limits:13.1%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA W/A FULL FACEPIECE OPERATED IN
PRESSURE-DEMAND WHEN FIGHTING FIRES. USE WATER FOG NOZZLES TO COOL
CLOSED CONTAINER.
Unusual Fire/Explosion Hazard:DON'T USE WATER. FLAMMABLE LIQUID, CAN
RELEASE VAPORS THAT FORM FLAMMABLE MIXTURES AT TEMPERATURE ABOVE
THE FLASHPOINT. ELIMINATE/ISOLATE FROM ALL (SEE SUPP)

Accidental Release

Spill Release Procedures:WEAR RESPIRATOR, ABSORB W/VERMICULITE/OTHER
ABSORBENT MATERIAL. ELIMINATE ALL IGNITION SOURCES. STOP SPILL AT
SOURCE & PREVENT SPREADING.

Handling

Handling and Storage Precautions:STORE IN DRY AREA. KEEP CONTAIENRS
TIGHTLY CLOSED. PROTECT FROM PHYSICAL DAMAGE. EMPTIED CONTAINERS
RETAIN PRODUCT RESIDUES AND/OR SOLID.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS DESIGNED TO
COMPLY W/OSHA 1910,106. KEEP CLOSURE TIGHT & CONTAINER UPRIGHT TO
PREVENT LEAKAGE. DON'T STORE NEAR HEAT, SPARKS OR FLAME. DON'T GET
IN EYES. KEEP AWAY FROM CHILDREN. AVOID SKIN CONTACT.

Exposure Controls

Respiratory Protection:IF TLV OF THE PRODUCT OR ANY COMPONENT IS
EXCEED, A NIOSH/MSHA JOINTLY APPROVED AIR SUPPLY RESPIRATOR IS
ADVISED IN ABSENCE OF PROPER ENVIRONMENTAL CONTROL. OSHA
REGUALTIONS ALSO PERMIT OTHER NIOSH/MS HA RESPIRATOR UNDER
SPECIFIED CONDITION.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL & LOCAL EXHAUST)
VENTILATION TO MAINTAIN EXPOSURE BELOW TLV
Protective Gloves:SOLVENT RESISTANT GLOVES
Eye Protection:CHEMICAL SPLASH GOGGLES, SAFETY GLASSES
Other Protective Equipment:SOLVENT IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:WASH W/SOAP & WATER AFTER USE, BEFORE
EATING/SMOKING.
Supplemental Safety and Health
CONT' ON UNUSUAL FIRE: SOURCES OF IGNITION. COMBUSTION WILL PRODUCE
CO2, CO & TOXIC GASSES.

Chemical Properties

Boiling Pt:B.P. Text:167-302F
Vapor Density:>1
Spec Gravity:1.4
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE LIQUID, SOLVENT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:BURNING CAN PRODUCE C02, CO

Disposal

Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. CONTAMINATED
ABSORBENT MAY BE DEPOSITED IN A LANDFILL IN ACCORDANCE W/LOCAL,
STATE & FEDERAL REGULATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.